Filamento PETG plata malaquita verde 1KG
Normalmente está listo en 24 horas
Recogida disponible, normalmente está listo en 24 horas
1830 E Centerton Blvd
Bentonville AR 72712
Estados Unidos
UltraDry™ Filamento PETG plata malaquita verde 1KG Description
Verde Malaquita Plateado
Una atrevida mezcla metálica que fusiona una base plateada fría con pigmentos verde malaquita saturados. El acabado ofrece un brillo profundo similar al de las piedras preciosas, con una reflectividad suave de estilo seda y transiciones de realce nítidas. Las impresiones muestran una profundidad estratificada y una definición de contorno clara, lo que le otorga a sus piezas un aspecto mineral de primera calidad que destaca en cualquier plataforma de construcción.
Secado en fábrica. Listo para imprimir.
Cada bobina se seca y sella en la fábrica mediante nuestro proceso UltraDry™ para una extrusión sin burbujas, paredes limpias y un rendimiento predecible: sin problemas de humedad, sin desperdicio de filamento y sin impresiones fallidas.
Por qué el PETG PETGUSA tiene un mejor rendimiento
-
Control de humedad UltraDry™ que garantiza una extrusión limpia y estable para un brillo superficial impecable
-
Formulación DryFusion™ que mejora la fusión de capas para obtener transiciones suaves similares a la seda
-
Pigmentos de alta claridad con aditivos metálicos para acabados ricos y reflectantes
-
Tolerancia dimensional ajustada para un flujo constante en impresiones detalladas o decorativas
-
Formulación con precisión de color que se mantiene fiel en todas las tiradas de producción
-
Mezcla de PETG de baja deformación ideal tanto para impresoras cerradas como abiertas
-
Excelente adhesión de capa sin sacrificar detalles
-
Optimizado para operaciones de impresión industrial a gran escala
Perfecto para cosplay, accesorios, figuras, piezas de exhibición, modelos decorativos, impresiones artísticas y cualquier proyecto donde el acabado, el brillo y el impacto visual sean lo más importante.
Filamento PETG de primera calidad diseñado para creadores que exigen fiabilidad.
Cada bobina está secada en fábrica con UltraDry™ y sellada para una extrusión consistente y sin burbujas, lo que le brinda paredes lisas, detalles limpios y un acabado pulido en cada impresión.
Si busca un filamento que imprima de forma limpia, resistente y correcta a la primera, este es el indicado.
Colecciones exclusivas de PETG
Diseñado para Rendir
Printer Compatibility
UltraDry™ filaments are engineered for maximum reliability across nearly all commercially available FDM 3D printers that use 1.75 mm filament. Thanks to DryFusion™ zero‑moisture processing, UltraDry™ materials deliver consistent extrusion, strong layer bonding, and reduced stringing across open‑frame, enclosed, and CoreXY systems.
Universal Compatibility: Works with any 1.75 mm printer capable of:
- 240–260°C nozzle temperature (varies by material)
- 70–90°C heated bed
- Standard PETG flow rates
| Printer Model | Compatibility | Notes |
|---|---|---|
| Bambu A1 | Fully compatible | Excellent PETG performance |
| Bambu P1P | Fully compatible | Enclosure optional |
| Bambu P1S | Fully compatible | Mild enclosure heat improves consistency |
| Bambu X1C | Fully compatible | High‑speed PETG capable |
| Prusa MK3S+ | Fully compatible | Standard PETG profile works |
| Prusa MK4 | Fully compatible | High‑speed PETG supported |
| Ender 3 V2 | Compatible w/ conditions | Use enclosure or draft shield |
| Ender 3 S1 | Compatible w/ conditions | Direct drive recommended |
| Creality K1 | Fully compatible | High‑speed PETG capable |
| Elegoo Neptune 4 | Fully compatible | High flow rates supported |
| Elegoo Neptune 4 Pro | Fully compatible | Best with 0.4–0.6 mm nozzle |
| Anycubic Kobra 2 | Fully compatible | Use 240–250°C nozzle |
| Anycubic Kobra Max | Fully compatible | Large prints benefit from enclosure |
| Sovol SV06 | Fully compatible | Direct drive ideal |
| Sovol SV07 | Fully compatible | High‑speed PETG capable |
| Flashforge Adventurer 4 | Fully compatible | No special requirements |
| Raise3D E2 | Fully compatible | Excellent dimensional accuracy |
| Qidi X‑Plus 3 | Fully compatible | High‑speed PETG supported |
| Qidi X‑Smart 3 | Fully compatible | No special requirements |
| Voron 2.4 | Fully compatible | Chamber heat improves bonding |
Recommended Print Settings
- Nozzle Temperature: 240–260°C (material‑dependent)
- Bed Temperature: 70–90°C
- Cooling: 20–60%
- Nozzle Size: 0.4 mm recommended; 0.6 mm for high‑flow
- Nozzle Material: Brass for standard PETG; hardened steel for abrasive materials
- Bed Surface: PEI textured or smooth
- Adhesion: Brim recommended for large parts
- Retraction: 0.6–1.2 mm (direct drive), 2–3 mm (Bowden)
- Flow Rate: 100–103%
Drying Recommendations (UltraDry™ Filaments)
- Drying Required: Not required before first use
- Factory Moisture Level: Up to 4× lower moisture than typical PETG
- Optional Refresh Cycle: 55–60°C for 2–3 hours if exposed long‑term
- Why: UltraDry™ starts at true zero‑moisture using DryFusion™ processing
Material‑Specific Adjustments
Transparent PETG
- Increase nozzle temperature by +5–10°C
- Slow outer walls to 20–35 mm/s
- Cooling 30–40%
- Use enclosure when available
- Use 4–6 perimeters for clarity
- Avoid gyroid infill for optical parts
Silk PETG
- Reduce print speed for best gloss
- Increase cooling to 40–60%
- Reduce retraction slightly
- Slower outer walls improve sheen
Metallic PETG
- Increase nozzle temperature by +5°C
- Reduce retraction to avoid pigment clogs
- Cooling 30–50%
- Slower outer walls improve metallic sheen
- Hardened nozzle recommended for heavy metallic blends
Matte PETG
- Reduce retraction speed by 10–20%
- Slower outer walls for uniform matte finish
- Cooling 30–50%
Shimmer / Sparkle PETG
- Increase nozzle temperature by +5°C
- Reduce retraction to avoid particle snags
- Cooling 30–50%
- Slower outer walls improve shimmer uniformity
- Hardened nozzle recommended for heavy sparkle blends
LightFX / Diffusion PETG
- Increase nozzle temperature by +5°C
- Cooling 30–40%
- Slower outer walls for even diffusion
- Works best with thicker walls
- Avoid high fan speeds
Rainbow / Multicolor PETG
- Slower speeds improve color transitions
- Cooling 30–50%
- Best results on taller prints
Carbon Fiber PETG
- Hardened steel or ruby nozzle required
- Cooling 20–40%
- Reduce retraction by 10–20%
- Slower outer walls improve consistency
- Matte finish expected
Glass Fiber PETG
- Hardened steel nozzle required
- Cooling 20–40%
- Moderate speeds improve dimensional accuracy
- Higher rigidity and heat resistance
Flame Retardant PETG
- Increase nozzle temperature by +5–15°C
- Cooling 20–40%
- Slower speeds improve layer adhesion
- FR additives increase viscosity and require more heat
Material Safety & Compliance
All PETGUSA filaments are independently tested by ANPU Testing (Shenzhen) and fully comply with EU RoHS Directive 2011/65/EU + (EU) 2015/863. No restricted heavy metals, flame retardants, or phthalates were detected in any sample.
| Substance | Result | Limit | Method |
|---|---|---|---|
| Lead (Pb) | Not Detected | 1000 mg/kg | IEC 62321-5 |
| Cadmium (Cd) | Not Detected | 100 mg/kg | IEC 62321-5 |
| Mercury (Hg) | Not Detected | 1000 mg/kg | IEC 62321-4 |
| Hexavalent Chromium (Cr⁶⁺) | Not Detected | 1000 µg/cm² | IEC 62321‑7‑2 |
| PBBs (Polybrominated Biphenyls) | Not Detected | 1000 mg/kg | IEC 62321‑6 |
| PBDEs (Polybrominated Diphenyl Ethers) | Not Detected | 1000 mg/kg | IEC 62321‑6 |
| Phthalates (DBP, BBP, DEHP, DIBP) | Not Detected | 1000 mg/kg | IEC 62321‑8 |
Verified across PETG Basic, PETG‑CF, PETG Matte, and PETG‑GF materials. Full ANPU reports available upon request.